Step 1:
The needle bearing for gear shifting cam must be installed again. Use a socket to drive the bearing in place.
![](http://mc.grenasberg.no/wp-content/uploads/2019/08/Needle-bearing-300x269.jpg)
The needle bearing seen from the inner and outer side of the crankcase.
![](http://mc.grenasberg.no/wp-content/uploads/2019/08/Parts-300x296.jpg)
Step 2:
Cam and forks mounted:
![](http://mc.grenasberg.no/wp-content/uploads/2019/08/Gear1-300x225.jpg)
A greate help to look at the pictures taken while stripping down the engine :
![](http://mc.grenasberg.no/wp-content/uploads/2019/08/Gear2-300x245.jpg)