Browse Category: Clutch

Clutch Release Assembly

The parts were cleaned, greased and refitted.

Mounted in the cover and fitted onto the bike:

See the service manual for the procedure how to hook up the clutch cable and do the adjustments. I will also update this post later on when I do my own clutch adjustments.

Side cover:

The bike so far:

Clutch

The process of assembling the clutch is very much the same as I did on my GT750

Pictures from the GT380:

Before tightening the nut I inserted my own home made tool for locking the clutch.

50 Nm

Soaked in oil before mounting:

All good.

No torque settnings. Only at tap on the wrench after all the bolts are driven home.