![](http://mc.grenasberg.no/wp-content/uploads/2018/02/Carb_1-edit-300x225.jpg)
Dip the float into boiling water. If you spot any bubbles from the float there are a leakages. Very hard to solder a bad one, buy a new float.
The needle jet require new O-ring. Always replace the old one.
![](http://mc.grenasberg.no/wp-content/uploads/2018/02/Carb_2-edit-300x225.jpg)
Removal of the main jet.
![](http://mc.grenasberg.no/wp-content/uploads/2018/02/Carb_3-edit-300x229.jpg)
Removal of the pilot jet.