Mounting the fork
The fork was mounted according to the parts manual (GT380k)
![](https://usercontent.one/wp/mc.grenasberg.no/wp-content/uploads/2022/06/image-12-1024x677.png)
Parts no can be found in the manual, go to the: Documents at my blog.
![](https://usercontent.one/wp/mc.grenasberg.no/wp-content/uploads/2022/06/image-13.png)
![](https://usercontent.one/wp/mc.grenasberg.no/wp-content/uploads/2022/06/image-14.png)
Resin print of 51553-3300:
![](https://usercontent.one/wp/mc.grenasberg.no/wp-content/uploads/2022/06/image-16.png)
I was missing some cushion parts. I only had one of the cushion for the headlamp bracket, the: 51553-3300
The resin 3D printer had some issues this time printing rubber resin, not sure why but still able to use the parts. I also tested the filament printer using flexible filament. Not 100%, but ok to be used.